|
| Click to enlarge |
Thermoguard Wallcoat is tested to BS476 Part 7: Class 1 surface spread of flame and BS476 Part 6: Fire propagation.
Designated Class 0 in accordance with U.K. Building Regulations.
Thermoguard IWC is an intumescent undercoat for application to previously painted plaster, Artex, board, brick and concrete walls and ceilings.
Thermoguard will issue a Certificate of supply upon request for each project for insurance, fire and building control records. Please enquire on the completion of your project.
Key information
|
Formulation |
Water based |
|
Pack sizes |
2.5KG, 5.0KG, 20KG |
Application information
|
Coverage |
Apply 1 coat Thermoguard Wallcoat at 8M2/litre plus either: |
|
|
1 coat Thermoguard Flame Retardant Acrylic Matt (White) )at 10 M2/ litre: |
|
|
Or 1 coats Flame Retardant Acrylic Eggshell at 10M2/litre per coat. |
|
|
Or 1 coats Flame Retardant Acrylic Matt (Colours) at 10M2/litre per coat. |
|
Touch dry |
2 - 4 hours |
|
Recoatable |
Overnight |
Key benefits
-
It is used to upgrade walls and ceilings coated with multi-layered paint films to Class 0.
-
Overcoating with Thermoguard FP flame retardant paint insulates old paint films from fire.
-
Controlling the spread of flames along walls and ceilings.
Inherently non-combustible surfaces such as plaster- board and brick can become a potential fire hazard due to repeated redecoration with conventional paints.
System information
Please refer to the product datasheet for additional information on preparation and application.
Please note that due to the critical nature of intumescent coatings, it is essential that the correct material and application specification is determined prior to placing your order.
Therefore, we would recommend you contact our sales office on tel: 01937 580980 in order for us to discuss your requirements in detail.
| Available Options: |
| Pack Size: |
|
|
