|
| Click to enlarge |
Thermoguard Timbercoat is tested to BS476 Part 7; Class 1 surface spread of flame and BS476 Part 6; Fire propogation. Designated Class 0 in accordance with U.K. Building Regulations.
Thermoguard Timbercoat has been developed for use on bare or previously painted timber and timber derivative surfaces where surface spread of flame or fire propogation need to be controlled.
When exposed to a fire Thermoguard Timbercoat expands to create a fire protective barrier, insulating the timber surfaces from heat and oxygen.
Thermoguard will issue a Certificate of supply upon request for insurance, fire and building control authority and client records. Please enquire on the completion of your project.
Key information
|
Formulation |
Water-based |
|
Pack sizes |
2.5KG, 5.0KG, 20KG |
Application information
|
Coverage |
Class 1 and Class 0: Apply 2 coats of Thermoguard Timbercoat at 7 sq m per litre per coat. Apply in 2 coats by brush or roller or spray. |
|
Touch dry |
2 - 4 hours |
|
Recoatable |
Overnight |
Key benefits
-
Used to upgrade bare and previously painted timber to Class 1 and Class 0
-
Insulates old paint films from fire
-
Controls the speed of flame along timber based substrates
System information
Please refer to the product datasheet for additional information on preparation and application.
Please note that due to the critical nature of intumescent coatings, it is essential that the correct material and application specification is determined prior to placing your order.
Therefore, we would recomend you contact our sales office on tel ; 01937 580980 in order for us to discuss your requirements in detail.
| Available Options: |
| Pack Size: |
|
|
