|
| Click to enlarge |
Flame Retardant Acrylic Eggshell Topcoat for Thermoguard Thermocoat W, Wallcoat and Timbercoat.
Thermoguard Flame Retardent paint is tested to BS5476 Part 7; Class 1 surface spread of flame and BS476 Part 6; Fire Propogation.
Designated Class 0 in accordance with U.K. Building Regulations.
Thermoguard Flame Retardent paint is a tintable topcoat for application over Thermoguard Thermocoat W, Wallcoat and Timbercoat.
Thermoguard will issue a Certificate of supply upon request for each project for insurance, fire and building control authority and client records. Please enquire on the completion of your project.
Key information
|
Formulation |
Water-based |
|
Pack sizes |
2.5L, 5L |
Application information
|
Coverage |
Apply to ceilings: Either 2 coats of Flame Retardent Vinyl Matt or 2 coats of Flame Retardent Vinyl Silk.
Apply to walls: 1 coat of Flame Retardent Acrylic Undercoat plus 1 coat of Flame Retardent Acrylic Eggshell. |
|
Touch dry |
2 hours |
|
Recoatable |
4 hours |
Key Benefits
-
Assists in the control of fire hazards caused by combustible materials.
-
Releases a flame extinguishing gas upon contact with fire.
-
Suitable for use direct to bare or sound previously painted non-combustible substrates.
Inherently non-combustible surfaces such as plaster-board and brick can become a potential fire hazard due to repeated redecoration with conventional paints.
System information
Please refer to the product datasheet for additional information on preparation and application.
Please note that due to the critical nature of intumescent coatings, it is essential that the correct material and application specification is determined prior to placing your order.
Therefore, we would recommend you contact our sales office on tel: 01937 580980 in order for us to discuss your requirements in detail.
|
Flame Retardant Topcoat for Thermoguard Timbercoat and Thermoguard W. Available in Matt, Eggshell, Silk, and Gloss finishes. |
| Available Options: |
| Pack Size: |
|
|
