
|
| Click to enlarge |
A fast cure, high build, mid sheen, hard-wearing, two pack epoxy system. Excellent low temperature cure, can be used in winter conditions down to 5oC. Excellent for floors subject to heavy traffic.
Key information
|
Formulation |
Solvent-based |
|
Coverage |
Up to 4 sqm / lt at 300 wft (150dft) |
Key benefits
-
Adhesion promoted coating for use on marginally prepared surfaces (a surface where only minimal cleaning and preparation is possible)
-
Can be applied to damp steel surfaces which have been cleaned by water jet with no reduction in performance
-
Fast dry – touch dry after 1-1 ½ hours, dry to handle after 6-8 hoursLow temperature cure down to –5°C
-
VOC compliant ‘one coat’ 30% sheen finish – PG 6/23
-
Applied at 150 microns dry film thickness will give up to 5 years life to first maintenance, in most aggressive exposures. Achievable with one coat application by airless/air assisted airless spray
-
Applied at 250 microns dry film thickness will give up to 10 years life to first maintenance, in most aggressive exposures. More than one coat will be necessary to achieve this higher film thickness.
-
Can be over coated by spray after 1-2 hours with Manor 2 Pack Acrylic CV for a high gloss finish. SUITABLE
Further information
Please refer to the product data sheet for further information including typical uses, drying times and application methods.
| Available Options: |
| Colour: |
|
|
|
|